6 Errors Using Safety Measures When Working On High

JonnaB30268069769 2018.12.03 03:31 조회 수 : 4

The skyscrapers, apartment blocks, commercial complexes ... appear more and more in big cities. But do you know that the workers in the accident when the construction, maintenance, maintenance in those areas are also pretty much, especially crash falls from the high.
What are the major causes of these accidents?
• Do not use personal protective equipment
Recommendations for wearing fall protection equipment are often ignored. It is very important to have a workplace safety plan, to be prepared with protective equipment and to wear safety gear when working on a daily basis. In the safety plan, it is important to identify and assess the risk of falls and to find ways to eliminate them. If risk can not be eliminated, appropriate fall arrest systems should be used:
- Installation of the floor is the correct technique, ensure safety,
- Workers should wear adequate personal protective equipment.
- Training safety regularly for employees.
- Check and maintain the equipment to ensure safety.

• Use of improper means of protection

Although workers still use personal protection to avoid falls, it is not always used properly. In many cases, workers wear protective gear too loosely, the floor operation is not quality assurance, floor maneuver improper installation.
In addition to the use of false protective equipment is a big mistake, many contractors also purchase protective equipment does not match the working conditions. A common example is that many contractors purchase shock absorbers and use them in areas where there is insufficient clearance. A retractable seat belt or fall arrestor should be used in certain situations.

• Use of unqualified means of protection

Using latex protection equipment, especially lanyards, is a deadly fatal mistake. Follow "Smart Policy": If in doubt, throw it away. Adding a week or a month is not worth the risk.
Equipment must be checked regularly and must be removed if it is worn or torn, frayed, cuts, deformed metal hardware, rusted flooring, perforation. In addition, exposure to heat and chemicals can cause further damage. These signs indicate that the safety device is no longer usable.

• Inadequate training and guidance

Lack of guidance - in the appropriate language - is the main reason for the equipment being used improperly or not. The safety supervisor should check the instructions that accompany the equipment and train people how to use it.
Trainers know the hazards in the workplace, know how to eliminate or control hazards, and know how to teach workers to protect themselves. That is why the coach must be an authority. The trainer must explain the following:
- The nature of the danger of falling in the workplace.
- How to install, maintain and disassemble the system of personal protection devices.
- How to use fall protection and personal fall protection systems.
- nắp ga gang thành an Limit mechanical devices to work while working on high.
- Method of handling and preserving personal protective equipment.

• Choice of fixed point is not appropriate

Choosing an inappropriate fixed point is a big deal. The best lanyard or lifeline can not be prevented from falling over if the wrong spot is chosen.
A fixed anchor must support 5,000 pounds for an individual. In any case, free fall should be limited to 6 feet or less to avoid injury when suspended in the air and anchors should be selected based on how the rescue will be performed. For floor operations to work on the high to be installed absolutely adhere to the instructions to ensure safety.

• Wait for falling.
When identifying hazards that lead to falls, analyze the likelihood of serious injury or death, as well as the number of time employees will be exposed to danger. Take appropriate action and update your safety plan, do not wait for the free fall to occur. Basically, you must eliminate the risk of falls by changing processes or work environments.

Remember 3 steps - to completely eliminate the risk of falling, prevent falling and provide fall prevention equipment for the individual - you will save lives and prevent serious injury.
Thanh An operating floor in cooperation with the absolute safety works!

If you have any concerns regarding the place and how to use nắp ga gang, you can make contact with us at our own internet site.
번호 제목 글쓴이 날짜 조회 수
» 6 Errors Using Safety Measures When Working On High JonnaB30268069769 2018.12.03 4
27 How To Gauge Gas Manhole Cover? DamianKingsley24331 2018.10.11 54
26 Come And Play Bingo For Free On Your Smartphone IonaWfb64325243 2018.09.01 82
25 Online Betting A New Way To Test Ur Brain TimothyCromwell0622 2018.09.01 70
24 Bet On Sports For Fun And Money! ChristinaVgm870636887 2018.08.18 38
23 Winning Tips For Playing Online Slots Juan02M27529759 2018.08.16 40
22 How To Select The Winning Lottery Numbers Wisely? MariettaStone4673 2018.08.08 36
21 Playing Online Poker ErikaPike55691706606 2018.08.08 49
20 Giảm Giá 50% Khi Chọn Bác Sĩ Hàn Quốc....phẫu Thuật IanCoombe44563364 2018.07.26 30
19 [12.29 예술의전당 IBK챔버홀] 2017 필하모니안즈서울 송년음악회 Adieu String Cantabile file tnbent@tnbenter.com 2017.12.04 1789
18 [2017.09.08]콰르텟블랙 두번째 여행 - A Feast of Strings 예술의전당 IBK챔버홀 file tnbent@tnbenter.com 2017.08.11 68
17 [2017.08.25] 미야자와 플루트 콰르텟 제 4회 정기연주회 예술의전당 IBK챔버홀 file tnbenter 2017.08.02 62
16 제9회 개나소나콘서트 tnbenter 2017.07.28 100
15 필하모니안즈서울 정기연주회 사계, 그리고 바로크챔버뮤직 tnbenter 2017.07.10 56
14 피아니스트 송윤원 독주회 tnbenter 2017.07.10 84
13 2017 러시아 야쿠츠크 백야 국제 뮤직 페스티벌- 야쿠츠크국립오케스트라 & 필하모니안즈 서울 오케스트라 연합콘서트 tnbenter 2017.07.04 65
12 2017 러시아 야쿠츠크 백야 국제 뮤직 페스티벌- 라이징스타 콘서트Ⅱ 바이올리니스트 송선희 독주회 tnbenter 2017.07.03 338
11 2017 러시아 야쿠츠크 백야 국제 뮤직 페스티벌- 그랜드 갈라 피날레 콘서트 ‘야쿠티아여 영원하라' tnbenter 2017.07.03 62
10 2017 러시아 야쿠츠크 백야 국제 뮤직 페스티벌- YWIMF 스페셜 아티스트 콘서트 시리즈Ⅳ 작곡가 신이나 작품발표회 tnbenter 2017.07.02 57
9 2017 러시아 야쿠츠크 백야 국제 뮤직 페스티벌- 라이징스타 콘서트 Ⅰ 한국 국악 영아티스트 연주회 tnbenter 2017.07.02 84